F1 Merchandise Shop, racing posters & memorabilia

A beautifully finished Bertone slotcar in scale 1/32 (the red is actually much "warmer" than in the pictures but our bright studio lights "bleach" it somewhat) in "Teamslot" livery.

Technical specification:

• Ready-to-run
• Scale: 1/32
• Length: Approximately 5.5 inches
• Weight, out-of-the-box: 78 gramms
• Inline motor with rear wheel drive
• Double, round, magnet for improved roadholding
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

A beautifully finished Bertone slotcar in scale 1/32 in "Squadra Corse" livery.

Technical specification:

• Ready-to-run
• Scale: 1/32
• Length: Approximately 5.5 inches
• Weight, out-of-the-box: 78 gramms
• Inline motor with rear wheel drive
• Double, round, magnet for improved roadholding
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

A beautifully finished Bertone slotcar in scale 1/32 in "Spa 1971 # 42" livery.

Technical specification:

• Ready-to-run
• Scale: 1/32
• Length: Approximately 5.5 inches
• Weight, out-of-the-box: 78 gramms
• Inline motor with rear wheel drive
• Double, round, magnet for improved roadholding
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

A beautifully finished Bertone slotcar in scale 1/32 in "Spa 1971 # 40" livery.

Technical specification:

• Ready-to-run
• Scale: 1/32
• Length: Approximately 5.5 inches
• Weight, out-of-the-box: 78 gramms
• Inline motor with rear wheel drive
• Double, round, magnet for improved roadholding
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Spirit of Spain, is a wonderfully detailed replica of S/N 1050, after it was modified to "M" specification, as entered by Scuderia Filipinetti and raced by Corrado Manfredini and Giancarlo Gagliardi during the 1971 Le Mans 24 Hours.

Manfredini & Gagliardi had to retire in the 14th lap due to gearbox trouble.

The original car survives to this day and now seems to reside in Switzerland.

This ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 6 inches
• Great detailing with brake discs and fine tampo print
• Sidewinder Mabuchi motor
• Mild magnet for improved roadholding
• Weight Overall, out of the box: 78 gramms
• Will run on all common 12V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

Comes in a Display Box.

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

A great slot car, ready-to-run and with the following specification:

• Scale: 1/32
• Overall length ca. 5.9 inches
• Great detailing with brake discs and fine tampo print
• Inline Mabuchi motor
• Innovative front suspension
• Weight Overall, out of the box: 84g
• Will run on all common 12V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

This car is a replica of the McLaren that Chuck Parsons drove in the last round of the 1971 CanAm season at Riverside. Chuck finished the race in 5th place, 2 laps behind winner Denny Hulme.

This is probably the best detailed ready-to-run slot car money can buy at the moment:

• Scale: 1/32
• Overall length ca. 5.9 inches
• Tremendously detailed
• Working differential on the rear axle
• Weight Overall, out of the box: 100g
• Will run on all common 12V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Slot.it of Italy, is a wonderfully detailed replica of the Porsche 956 C as raced by George Follmer, John Morton & Kenper Miller during the 1986 Le Mans 24 Hours.

The car would finish the race in 3rd position with 354 laps or 4.796 KM to its name.

This ready-to-run slotcar has the following specifications:

• 1/32 scale
• Overall length approximately 5.8 inches
• Body: ABS plastic, low COG, light weight
• Chassis: Composite plastic motor mount + abs
• Transmission: Inline, 9 / 28 tooth ProAxle crown. Integral motor/rear axle H.R.S. support
• Rear wheels: ProAxle Aluminium grub screw wheels
• Bushings: Bronze gimbal HRS type
• Axles: ProAxle steel rectified 2.38mm / 3/32"
• Motor: V12/2b-25K 25.000 RPM @12V, balanced armature
• Weight Overall, out of the box: 78g.
• Will run on all common 9 - 16 Volt home and club tracks.

Comes in Display Box.

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Cartrix of Spain, is a wonderfully detailed replica of a Boxster with its top down.

This VERY fast ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 5.5 inches
• Great detailing
• Strong magnet for improved roadholding
• Rear Wheel Drive
• Weight out-of-the-box: 68 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Cartrix of Spain, is a wonderfully detailed replica of a Boxster with its top down.

This VERY fast ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 5.5 inches
• Great detailing
• Strong magnet for improved roadholding
• Rear Wheel Drive
• Weight out-of-the-box: 68 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

This 1/32nd scale slotcar, made by Spirit of Spain, is a wonderfully detailed replica of the Reynard 2KQ-LM Volkswagen as entered by MOPAR Team Oreca and raced by Didier Theys, Jeffrey van Hooydonck and Didier André during the 2000 edition of the Le Mans 24 Hours.

The trio finished the race in 20th position with a total of 292 laps to their name.

This ready-to-run slotcar has the following specifications:

• Scale: 1/32
• Overall length ca. 6 inches
• Great detailing with brake discs and fine tampo print
• Inline Mabuchi motor
• Strong magnet for improved roadholding
• Weight Overall, out of the box: 78 gramms
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)
• Comes in Display Box.

LIMITED AVAILABILITY !

FREE shipping to ANY destination in the world !!

A beautifully finished Saleen S7 slotcar in scale 1/32.

Technical specification:

• Ready-to-run
• Scale: 1/32
• Length: Approximately 6 inches
• Inline motor with rear wheel drive
• Double, round, magnet for improved roadholding
• Will run on all common 9 - 16V 1/32 scale tracks (Carrera, Scalextric, Ninco, SCX etc.)

FREE shipping to ANY destination in the world !!